Black plate (506,1)
2. Firmly rotate the wiper blade to the
right until it unlocks, then remove the
blade.
CAUTION
To prevent damage to the rear
window let the wiper arm down
easily, don't let it slap down on the
rear window.
3. Pull down the blade rubber and slide it
out of the blade holder.
4. Remove the metal stiffeners from each
blade rubber and install them in the
new blade.
CAUTION
Don't bend or discard the stiffeners.
You need to use them again.
5. Carefully insert the new blade rubber.
Then install the blade assem bly in the
reverse order of removal.
8-30
Maintenance and Care
Owner Maintenance
CX-9_8DU1-EA-14H_Edition1 Page506
Thursday, June 5 2014 4:20 PM
Form No.8DU1-EA-14H
To Next Page
Loading...
