Mazda 3 - Page 5

How to use the Mazda Connect Multimedia System - Use Apple CarPlay
or Android Auto.
1. First, ensure your IOS or Android device is unlocked.
2. Connect your IOS or Android device with an appropriate cable.
3a. Now press “Always Enable” to activate.
3b. You should then be automatically directed to the correct interface.
4a. If not, tilt the Multimedia Commander to the right on the home screen to access.
4b. To exit, just press and hold the home button.
How to use the Mazda Connect Multimedia System - Set your favourite radio station.
1. Select “ENTERTAINMENT” from the home screen.
2. Select your desired radio band – AM/FM/DAB from the entertainment menu.
3. You can then use the Multimedia Commander to access a list of tuning options.
4. Press and hold the “FAVOURITES” button next to the Multimedia Commander to save the radio station.
How to use the Mazda Connect Multimedia System - Pair your Bluetooth® device.
1. Turn on Bluetooth® on your phone or audio device and ensure it is visible to other devices.
2. Select “COMMUNICATION” from the home screen.
3. If there isn’t a phone currently connected to the system, it will automatically prompt to connect a device. Select “CONNECT”.
4. Ensure Bluetooth® is turned ON at the top of the menu.
5. Select the device you wish to pair.
6. If required, enter the pairing code shown on the vehicle display, or simply confirm the code by pressing either “YES” or “OK”.
7. Finally, press “YES” on the vehicle display to confirm, and you’ll be connected.