Mazda 3 - Page 315

4 – 171
When Driving
i-ACTIVSENSE
Lane Departure Warning
If the system determines that the vehicle may deviate from its lane, the lane departure
warning (beep sound, rumble sound
*1
, or steering wheel vibration) is activated and the
direction in which the system determines that the vehicle may deviate is indicated in the
multi-information display or the active driving display.
For vehicles equipped with the multi-information display, the direction which the system
determined that the vehicle may be deviating from its lane is indicated in the multi-
information display.
For vehicles equipped with the active driving display, the colour of the lane line in the
direction which the system determined that the vehicle may be deviating from its lane
changes from white to amber and the vehicle lane line À ashes.
Multi-information Display Active Driving Display
NOTE
 
If you have set the lane departure warning sound to the beep sound/rumble sound
*1
setting, the warning sound may not be heard depending on the surrounding noise
conditions.
 
If you have set the lane departure warning system to the steering wheel vibrations
setting, the vibration may not be felt depending on the road surface conditions.
 
When the setting for the steering operation assist is changed to operational, the
warnings can be set to activate/not activate. (When the setting for the steering
operation assist is changed to non-operational, the warnings cannot be set to not
activate.)

Refer to Setting Change (Personalisation Features) on page 9-17 .
/C\FCA(,'''A'FKVKQPKPFD/C\FCA(,'''A'FKVKQPKPFD 