Mazda 3 - Page 75

3 – 5
Before Driving
Keys
NOTE
 
(With the advanced keyless
function (European models))

The setting can be changed so that a
beep sound is heard for con¿ rmation
when the doors and the liftgate/boot
lid are locked/unlocked using the
key.

(With the advanced keyless
function (Except European
models))

A beep sound can be heard for
con¿ rmation when the doors and the
liftgate/boot lid are locked/unlocked
using the key. If you prefer, the beep
sound can be turned off.

The volume of the beep sound can
also be changed.

Refer to Personalisation Features on
page 9-17 .
NOTE

Use the following procedure to
change the setting.
1. Switch the ignition off and close
all of the doors and the liftgate/
boot lid.
2. Open the driver's door.
3. Within 30 seconds of opening the
driver's door, press and hold the
LOCK button on the key for 5
seconds or longer.
All of the doors and the liftgate/
boot lid lock and the beep sound
activates at the currently set
volume. The setting changes each
time the LOCK button on the key
is pressed and the beep sound
activates at the set volume. (If the
beep sound has been set to not
activate, it will not activate.)
4. The setting change is completed
by doing any one of the following:
 
Switching the ignition to ACC
or ON.
 
Closing the driver's door.
 
Opening the liftgate/boot lid.
 
Not operating the key for 10
seconds.
 
Pressing any button except the
LOCK button on the key.
 
Pressing a request switch.
The operation indicator light À ashes when
the buttons are pressed.
/C\FCA(,'''A'FKVKQPKPFD/C\FCA(,'''A'FKVKQPKPFD 