EXTERIOR TRIM
09-16–10
8. When the roof panel link pin contacts the Power retractable hardtop close position switch and the switch is
turned on, the roof panel is determined to be fully closed and the roof panel motor stops.
9. The deck panel motor operates and the deck panel moves in the close direction.
10. When the deck panel link pin contacts the deck
panel close switch and the switch is turned off, the
deck panel is determined to be fully closed and
the deck panel motor stops.
11. When the Power retractable hardtop close
operation is finished, an operation finish beep
signal is sent to the instrument cluster.
End Of Sie
POWER RETRACTABLE HARDTOP CONTROL MODULE FUNCTION
id091600101400
• Controls the Power retractable hardtop control module, roof motor, and the deck panel motor based on the
signals from each switch.
• A fail-safe function has been adopted which stops the operation if an abnormal signal is detected from any part
during Power retractable hardtop operation.
• A self-diagnostic function has been adopted which can verify the malfunctioning area.
DECK PANEL
POWER RETRACTABLE HARDTOP
ROOF
MOTOR
LINK
POWER RETRACTABLE HARDTOP
CLOSE POSITION SWITCH
FULLY-CLOSE
POSITION
amxuun0000005
DECK PANEL
PIN
POWER RETRACTABLE HARDTOP
CLOSE POSITION SWITCH
amxuun0000003
3404-1U-05F(09-16).fm 10 ページ ２００６年７月３日 月曜日 午前９時５２分
To Next Page
Loading...
