EXTERIOR TRIM
09-16–12
Buzzer operation function
• Sends beep signals to the instrument cluster before and after the Power retractable hardtop system operation,
when the operation is refused, and during an operation warning. (See 09-22-2 POWER RETRACTABLE
HARDTOP WARNING ALARM CONSTRUCTION/OPERATION.)
Power retractable hardtop indicator light control
• Sends illumination or flash signal to the power retractable hardtop indicator light in the following pattern
depending on the Power retractable hardtop status.
End Of Sie
Top lock switch
malfunction
Top lock switch on is detected
with the Power retractable
hardtop open.
Close operation can be performed only
once. Inhibits the operation after the
Power retractable hardtop is fully closed.
Top lock switch off is detected.
Top lock switch off is detected
with the Power retractable
hardtop closed and vehicle
speed detected.
None Vehicle speed 0 km/h is
detected.
Power retractable
hardtop switch
malfunction
Switch input is 1 V or less. Inhibits Power retractable hardtop
operation.
Normal input voltage is
recovered.
Switch on signal is detected for
30 s or more after IG-ON.
Inhibits Power retractable hardtop
operation.
Power retractable hardtop
switch off signal is detected.
Power retractable hardtop
open and close on signals are
detected simultaneously for 30
s or more.
Inhibits Power retractable hardtop
operation.
Power retractable hardtop
switch off signal is detected.
Communication
error
CAN system of the Power
retractable hardtop control
module is malfunctioning.
Inhibits Power retractable hardtop
operation.
Normal communication is
recovered.
CAN communication error
between PCM and Power
retractable hardtop control
module
Inhibits Power retractable hardtop
operation.
Normal communication is
recovered.
CAN communication error
between TCM and Power
retractable hardtop control
module
Inhibits Power retractable hardtop
operation.
Normal communication is
recovered.
Vehicle speed signal error Inhibits Power retractable hardtop
operation.
Normal communication is
recovered.
Item Detection Condition Action after malfunction detected Recovery condition
Illumination pattern Illumination condition Lights off condition
Power
retractable
hardtop
operating
Power retractable hardtop
operation is continued.
• Open operation is finished.
• Close operation is finished
Power
retractable
hardtop half-
open and not
operating
• Power retractable hardtop
is fully opened and the top
lock is unlocked. (Top lock
switch is OFF.)
• Power retractable hardtop
switch is turned off during
Power retractable hardtop
operation and the
operation is temporarily
stopped.
• Power retractable hardtop
switch is turned on.
• Top lock is locked after
close operation is finished.
Power
retractable
hardtop
system
malfunctionin
g
DTC is detected or
recorded.(The power
retractable hardtop indicator
light does not illuminate
depending on the DTC.)
(The power retractable hardtop
indicator light does not
illuminate depending on the
DTC.)(See 09-16-19 ON-
BOAD DIAGNOSTIC PID
DATE MONITOR FUNCTION.)
• Malfunction is repaired or
the DTC is cleared.
t
t
Illuminated
Not illuminated
Approx. 0.5 s
Illuminated
Not illuminated
t
t
Illuminated
Not illuminated
Approx. 0.3 s
3404-1U-05F(09-16).fm 12 ページ 2006年7月3日 月曜日 午前9時52分