EXTERIOR TRIM
09-16–16
4. Deck panel link A is pressed upward to fully open
the deck panel.
5. When deck panel link A is fully opened, the sector
gear pin shown in the figure presses the deck
panel open position switch to stop the deck panel
motor rotation.
End Of Sie
ROOF/DECK PANEL MOTOR FUNCTION
id091600101700
• The motor rotates normally/reversely according to the signal from the power retractable hardtop control module
to move the roof panel automatically.
End Of Sie
DECK PANEL LINK A
DECK PANEL MOTOR
KNOB
amxuun0000005
SECTOR
GEAR
DECK PANEL CLOSE
POSITION SWITCH
DECK PANEL OPEN
POSITION SWITCH
PIN
amxuun00000060
3404-1U-05F(09-16).fm 16 ページ ２００６年７月３日 月曜日 午前９時５２分
To Next Page
Loading...
