EXTERIOR TRIM
09-16–21
Mazda MX-5
PID/Data Monitor Function
• The PID/data monitor function is used for optionally selecting input/output signal monitor items preset in the
power retractable hardtop control module and reading them out in real-time.
• Use the mazda modular diagnostic system (M-MDS) to read the PID/data monitor.
PID/data monitor table
End Of Sie
PID name
(definition)
Data contents
Unit/
Operation
Terminal
DTC_CNT Number of continuous DTCs −−
VPWR Module Supply Voltage V 1X
VSS Vehicle speed MPH/KPH −
RHT_OP Power Retractable Hardtop Open Position Sensor On/Off 1T
RHT_CL Power Retractable Hardtop Closed Position Sensor On/Off 1R
DECK_OP Deck Open Position Sensor On/Off 3F
DECK_CL Deck Close Position Sensor On/Off 3O
SW_OP Power Retractable Hardtop Open Switch On/Off 1H
SW_CL Power Retractable Hardtop Close Switch On/Off 1H
SW_STRIKER Top Lock Switch On/Off 1D
SW_TRUNK Trunk Switch On/Off 1F
TR_OP_CTL Trunk Opener Control On/Off −
Indicator power retractable hardtop Indicator Light On/Off 2C
3404-1U-05F(09-16).fm 21 ページ ２００６年７月３日 月曜日 午前９時５２分
To Next Page
Loading...
