INSTRUMENTATION/DRIVER INFO.
09-22–2
POWER RETRACTABLE HARDTOP WARNING ALARM CONSTRUCTION/OPERATION
id092200110300
System Wiring Diagram
Operation
Operation start sound
• A buzzer in the instrument cluster sounds if both of the following two conditions are met:
— Power retractable hardtop operation conditions are met.
— The power retractable hardtop (open/close) switch is pressed.
Operation complete sound
• A buzzer sounds when the power retractable hardtop open or close operation is completed.
Operation reject sound
• A buzzer in the instrument cluster sounds if any of the following conditions are met:
— The power retractable hardtop operation conditions are not met when the power retractable hardtop (open/
close) switch is pressed.
— The power retractable hardtop (open/close) switch is pressed with the power retractable hardtop system
DTC detected.
— The power retractable hardtop (open/close) switch is pressed when the power retractable hardtop is fully
closed and the system DTC is stored.
— Power retractable hardtop operation conditions are not met during power retractable hardtop operation.
— An power retractable hardtop system DTC is detected during power retractable hardtop operation.
Warning
• A buzzer in the instrument cluster sounds if any of the following conditions are met with the power retractable
hardtop half open.
— Vehicle speed signal is input.
— The selector lever is in any position except P or N (AT vehicles).
— The selector lever is not in neutral (neutral switch normal condition) (MT vehicles).
End Of Sie
IG1
B+
1G
1E
1J1L
1C
AND
INSTRUMENT CLUSTER
MICROCOMPUTER
CAN CONTROL
CIRCUIT
POWER RETRACTABLE
HARDTOP CONTROL MODULE
BUZZER
amxuun0000003
3404-1U-05F(09-22).fm 2 ページ 2006年7月3日 月曜日 午前11時8分