Black plate (16,1)
To change the seatback angle, lean
forward slightly while raising the lever.
Then lean back to the desired position and
release the lever.
Make sure the lever returns to its original
position and the seatback is locked in
place by attempting to push it forward and
backward.
CAUTION
When returning a rear-reclined
seatback to its upright position,
make sure you hold onto the
seatback with your other hand while
operating the lever. If the seatback is
not supported, it will flip forward
suddenly and could cause injury.
q
Height Adjustment (Driver's Seat)
To adjust the seat height, move the lever
up or down.
qLumbar Support Adjustment
(Driver's Seat)
í
Move the lever forwards to adjust the
lumbar support as required.
2-4
Essential Safety Equipment
í
Some models.
Seats
Mazda5_8FA7-EA-15G_Edition3 Page16
Friday, December 4 2015 8:24 AM
Form No.8FA7-EA-15G
To Next Page
Loading...
