Black plate (402,1)
3. Pull down the blade rubber and slide it
out of the blade holder.
4. Remove the metal stiffeners from each
blade rubber and install them in the
new blade.
CAUTION
Don't bend or discard the stiffeners.
You need to use them again.
5. Carefully insert the new blade rubber.
Then install the blade assem bly in the
reverse order of removal.
8-30
Maintenance and Care
Owner Maintenance
Mazda3_8BM5-EA-10F_Edition2 Page402
Monday, July 26 2010 1:54 PM
Form No.8BM5-EA-10F
To Next Page
Loading...
