Black plate (425,1)
Overhead light (Rear)
Edge
Vanity mirror lights
í
3. Install the new bulb in the reverse order
of removal.
Trunk light (4 Door)
1. Press both sides of the lens cap to
remove it.
2. Disconnect the bulb by pulling it out.
3. Install the new bulb in the reverse order
of removal.
Luggage compartment light (5 Door)
1. Wrap a small flathead screwdriver with
a soft cloth to prevent damage to the
lens and remove the lens by careful ly
prying on the edge of the lens with the
flathead screwdriver.
2. Disconnect the bulb by pulling it out.
3. Install the new bulb in the reverse order
of removal.
Maintenance and Care
Owner Maintenance
8-53
í
Some models.
Mazda3_8BM5-EA-10F_Edition2 Page425
Monday, July 26 2010 1:54 PM
Form No.8BM5-EA-10F
To Next Page
Loading...
