In
Case of Emergency
6-9
J
Fuse Replacement
If the electrical system doesn’t work,
first
inspect fuses on the driver
’
s side
of
the instrument panel.
1. Turn off the ignition and other
switches.
2. Pull the fuse straight out with the
fuse
puller provided on the fuse block
cover.
3. Inspect
it and replace it if it’
s blown.
4. Push
in a new fuse of the same rating,
and make sure it fits tightly. If it
doesn’t, have an Authorized Mazda
Dealer install it.
Some
spare fuses have been supplied
for
your
use:
one 10 amp (red), one 15 amp
(blue),
one 20 amp (yellow),
and one 30
amp (light green). If you use these spare
fuses, replace them with other fuses of
the same rating so you will have them
when you need them.
To Next Page
Loading...
