Essential
Safety Equipment
2-16
2. Rotate
and fold the belt webbing
over
itself
as required to remove the
twist.
3. Feed the folded portion of the belt
through the D-ring.
4. When
completed, the seat belt should
look like the above figure.
J Procedure
t
o C
orrec
t a R
otated
Tongu
e o
n t
h
e S
ea
t B
elt
1. Grasp the belt tongue and pull down
on
the belt webbing closest to you to
form a loop through the upper (nar-
row and longer) slot in the tongue.
To Next Page
Loading...
