Black plate (146,1)
Method for turning the system off
The maintenance monitor can be turned
off even after it has been turned on. If you
want to turn it off, the remaining distance
and time calculation to the next
maintenance period is stopped, and a
message does not display to indicate an
approaching maintenance period.
1. Press the up
or down part of the
INFO switch and select Settings, and
then press the INFO button.
2. Press the up
or down part of the
INFO switch and select Maintenance,
and then press the INFO butt on.
3. Press the up
or down part of the
INFO switch to select the item you
want to turn off from the following,
and then press the INFO butt on.
l
Scheduled
l
Tire Rotation
l
Tire Pressure
4. Select OFF and press the INFO button.
qTrip Computer and INFO Switch
The following information can be selected
by pressing the up
or down part of
the INFO switch with the ignition
switched ON.
l
The approximate distance you can
travel on the available fuel.
l
The average fuel economy.
l
The current fuel economy.
l
The average vehicl e speed.
l
Settings (Type A instrument cluster)
l
Warning (Type A instrument cluster)
If you have any problems with your trip
computer, consult an Authorized Mazda
Dealer.
Distance-to-em pty mode
This mode displays the approximate
distance you can travel on the remaining
fuel based on the fuel econom y.
4-18
When Driving
Instrument Cluster and Display
CX-5_8CT5-EA-12K_Edition1 Page146
Friday, October 19 2012 3:10 PM
Form No.8CT5-EA-12K
To Next Page
Loading...
