Mazda CX-50 2024 - Page 120

CAUTION
Always use only a genuine Mazda
fuel-filler cap or an approved
equivalent, available at an
Authorized Mazda Dealer. The
wrong cap can result in a serious
malfunction of the fuel and emission
control systems.
(U.S.A. and Canada)
It may also cause the check engine
light in the instrument cluster to
illuminate.
When using an automatic car wash
or a high water pressure car washer,
lock the vehicle. Otherwise, the
fuel-filler lid may open unexpectedly
and could be damaged.
▼
Refueling
Before refueling, close all the doors,
windows, and liftgate, and switch the
ignition OFF.
1. Using the following, unlock the
driver’s door.

Transmitter (page 3-15)

Touch sensor (page 3-13)

Door-lock switch (page 3-15)

Auto lock/unlock function (page
3-17)
NOTE

When unlocking the driver's
door, the fuel lid is also unlocked
at the same time.

When locking the driver's door,
the fuel lid is locked after 90
seconds.

The time until the fuel lid is
locked after locking the driver's
door can be changed.
Refer to the Settings section in
the Mazda Connect Owner's
Manual.

However, when the driver's door
is locked using the following
functions, the fuel lid is also
locked at the same time.

Auto lock/unlock function
(page 3-17)

Auto re-lock function (page
3-5) and (page 3-13)
2. Press the location shown in the
illustration and open the fuel lid.
3. To remove the fuel-filler cap, turn it
counterclockwise.
4. Attach the removed cap to the
inner side of the
fuel-filler
lid.
1. Fuel-filler lid
2.
Fuel-filler
cap
5. Insert the refueling nozzle all the
way and begin refueling. Pull out
the refueling nozzle after the
refueling stops automatically.
6. To close the fuel-filler cap, turn it
clockwise until a click is heard.
Before Driving
Fuel and Emission
3-31
CX50_8MG7-EA23G_Edition1_new 2023-3-13 9:43:28