EasyManua.ls Logo

Mazda CX-50 2024 - Ignition Switch

Mazda CX-50 2024
583 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Ignition Switch
Push Button Start Positions
The system operates only when the key
is within operational range.
Each time the push button start is
pressed, the ignition switches in the
order of
o,
ACC, and ON. Pressing
the push button start again from ON
switches the ignition
o.
1. Indicator light
2. Push button start
NOTE
The engine starts by pressing the
push button start while depressing
the brake pedal. To switch the
ignition position, press the push
button start without depressing the
pedal.
Do not leave the ignition switched
ON while the engine is not running.
Doing so could result in the battery
going dead. If the selector lever is in
the P position, and the ignition is in
ACC, the ignition switches o
automatically after about 25
minutes.
O
The power supply to electrical devices
turns o and the indicator light
(amber) also turns
o.
WARNING
Before leaving the driver's seat,
always switch the ignition
o,
set the
parking brake, and make sure the
selector lever is in P position:
Leaving the driver's seat without
switching the ignition o, setting the
parking brake, and shifting the selector
lever to P position is dangerous.
Unexpected vehicle movement could
occur which could result in an
accident.
In addition, if your intention is to leave
the vehicle for even a short period, it is
important to switch the ignition
o,
as
leaving it in another position will
disable some of the vehicle's security
systems and run the battery down.
ACC (Accessory)
Some electrical accessories will
operate and the indicator light (amber)
illuminates.
NOTE
The keyless entry system does not
function while the push button start
has been pressed to ACC, and the
doors will not lock/unlock even if they
have been locked manually.
ON
This is the normal running position
after the engine is started. The
indicator light (amber) turns
o.
(The
indicator light (amber) illuminates
when the ignition is switched ON and
the engine is not running.)
Some indicator lights/warning lights
should be inspected before the engine
is started.
Refer to Warning/Indicator Lights on
page 4-28.
Refer to Indication/Indicator Lights on
page 4-30.
When Driving
Start/Stop Engine
4-4
CX50_8MG7-EA23G_Edition1_new 2023-3-13 9:43:28

Table of Contents

Related product manuals