*
2 When the light switch is switched to a
dierent
position from the OFF, position while the
vehicle is stopped, the daytime running lights turn o. When starting to drive the vehicle, the daytime
running lights turn on again.
*
3 When the light switch is switched to the OFF position, and then to the position again, the
daytime running lights turn o directly after starting the engine. The daytime running lights turn on
when you begin driving the vehicle.
With auto-light control
Ignition Position ACC or OFF ON
Switch Position
OFF
*1
AUTO
OFF
*1
AUTO
Headlights O
O
*2
O
O
*2
Auto
*3*5
Auto
*4*5
On
Daytime running
lights
O O O O O
Taillights
Parking lights
License plate lights
Side-marker lights
O
O
*2
On
*2
On
*2
On
*
1 The light switch returns to the AUTO position automatically.
*
2 The lights are turned on continuously if the ignition is switched from ON to any other position with
the lights turned on. The lights are turned on for the
specified
period by the auto headlight
o
function.
*
3 During the daytime, the daytime running lights turn on automatically. During the nighttime, the
headlights, parking lights, taillights, license plate lights, and the side-marker lights turn on
automatically.
*
4 During the daytime, the daytime running lights, parking lights, taillights, license plate lights, and the
side-marker lights turn on automatically. During the nighttime, the headlights, parking lights,
taillights, license plate lights, and the side-marker lights turn on automatically.
*
5 When the light switch is switched to the OFF position while the vehicle is stopped, all of the lights
that are turned on turn
o.
When the light switch is switched from a position other than
to the
position while the vehicle is stopped, the running lights or the headlights turn
o.
When
starting to drive the vehicle, the lights that are turned o turn on again.
When Driving
Switches and Controls
4-49
CX50_8MG7-EA23G_Edition1_new 2023-3-13 9:43:28