Mazda CX-50 2024 - Page 273

Distance-between-vehicles
guideline
(at 80 km/h (50 mph) vehicle
speed)
Indication on multi-information
display
Indication on active driving dis-
play
*1
Medium (about 40 m (131 ft))
Short (about 30 m (98 ft))
Extremely short (about 25 m (82
ft))
*
1 Displays a pop-up image in the active driving display only when the driver operates the switch.
Changing the set vehicle speed
How to change the set vehicle speed using the RES switch
When the RES switch is pressed up (SET+), the vehicle accelerates, and when the
RES switch is pressed down (SET), the vehicle decelerates.

Press and release immediately: 1 km/h (1 mph)

Press and hold: 10 km/h (5 mph)
How to change the set vehicle speed using the accelerator pedal
Depress the accelerator pedal until the vehicle speed reaches the desired speed,
then press the RES switch up (SET+) or down (SET) and release the switch.
Temporary cancellation
If any of the following conditions is met, the MRCC with Stop & Go function is
canceled temporarily.

The MRCC with Stop & Go function operation conditions are not met.

The CANCEL switch is pressed.

The brake pedal is depressed.

The front radar sensors cannot detect target objects.
When Driving
i-ACTIVSENSE
4-122
CX50_8MG7-EA23G_Edition1_new 2023-3-13 9:43:28