When the detection indicator is set to “Display”, even with the 360° view monitor not
displayed, if a front ultrasonic sensor or a front corner ultrasonic sensor detects an
obstruction, the 360° view monitor switches automatically to display. When an obstruction
is no longer detected, the display switches to the display before the obstruction was
detected. However, while the 360° view monitor is displayed, it continues to display no
matter if an obstruction is detected or not.
System problem notification
If a problem occurs, the driver is notified of the problem by the following indications.
Detection Indicator
Solution
Without 360° view monitor
With 360° view moni‐
tor
Without front ultra‐
sonic sensor and front
corner ultrasonic sen‐
sor
With front ultrasonic
sensor and front cor‐
ner ultrasonic sensor
Discon‐
nection
The system may have a
malfunction. Have the ve‐
hicle inspected at an Au‐
thorized Mazda Dealer as
soon as possible.
System
mal‐
function
The system may have a
malfunction. Have the ve‐
hicle inspected at an Au‐
thorized Mazda Dealer as
soon as possible.
When Driving
Parking Sensor System (Mazda Connect (Type A))
4-278
CX-9_8JK1-EA-20G_Edition2_old 2020-7-20 17:31:45
To Next Page
