Black plate (224,1)
Variable-speed intermittent wipers
í
Set the lever to INT and choose the
interval timing by rotating the ring.
INT ring
Type B (With AUTO position)
Turn the wipers on by pulling the lever
down.
AUTO ― Auto control
LO ― Low speed
HI ― High speed
For a single wiping cycle, press the lever
up to MIST.
MIST ― Mist
AUTO (Auto-wiper control)
When the wiper lever is in the AUTO
position, the rain sensor senses the
amount of rainfall on the windshield and
turns the wiper on or off automatically
(off―intermittent―low speed―high
speed).
The sensitivity of the rain sensor can be
adjusted by turning the switch on the
wiper lever.
From the center position (normal), turn
the switch towards (+) for higher
sensitivity (faster response) or turn the
switch towards (
_
) for less sensitivity
(slower response).
Higher sensitivity
Less sensitivity
Switch
Center
position
5-64
Driving Your Mazda
í
Some models.
Switches and Controls
Mazda3_8AR2-EC-09E_Edition1 Page224
Thursday, April 9 2009 4:9 PM
Form No.8AR2-EC-09E
To Next Page
Loading...
