EasyManua.ls Logo

Mazda mx-5 2007 - Page 269

Mazda mx-5 2007
406 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Black plate (269,1)
14. Install the compressor hose to the tire
valve.
Valve
Compressor hose
15. Insert the compressor plug into the
interior accessory socket and turn the
ignition switch to the ACC position
(page 6-47).
Compressor plug
Center console
Compressor
CAUTION
l
Before pulling out the compressor
plug from the electrical socket, make
sure the compressor power switch is
off.
l
The compressor turns on a nd off
with the push-button switch.
16. Turn the compressor switch on and
inflate the tire carefully to the correct
inflation pressure.
WARNING
Never operate the compressor above
300 kPa (3.1 kgf/cm2, 3 bar, 43.5 psi):
Operating the compressor above 300
kPa (3.1 kgf/cm2, 3 bar, 43.5 psi) is
dangerous. When the inflation
pressure rises above 300 kPa (3.1
kgf/cm2, 3 bar, 43.5 psi), heated air
will be exhausted from the back of the
compressor and you could be burned.
CAUTION
If the compressor operates slowly or
becomes hot, it indicates overheating.
Turn the compressor off immediately
and leave it turned off for 30 minutes or
longer.
In Case of an Emergency
Flat Tire
7-11
MX-5_8V80-EA-06F_Edition3 Page269
Tuesday, August 29 2006 10:24 AM
Form No.8V80-EA-06F

Table of Contents

Other manuals for Mazda mx-5 2007

Related product manuals