4
–
84
When Driving
i-ACTIVSENSE
NOTE
If the LDWS warning sound is set to
rumble
*1
, the sound will be heard from
the vehicle speaker on the side which
the system determined the vehicle may
be deviating from its lane.
It may be difcult to hear the LDWS
warning beep depending on the
surrounding conditions such as outside
noise.
The volume of the LDWS warning sound
can be changed.
Refer to Personalization Features on
page 9-9.
The type of warning sound (rumble
*1
/
beep) on the LDWS can be changed.
Refer to Personalization Features on
page 9-9.
*1 A rumble strip is a series of grooves in
the road pavement surface positioned at
specic intervals, and when the vehicle
passes over it a vibration and rumble
sound is produced which alerts the
driver that the vehicle is departing from
the lane.
The rumble sound is a reproduction of
the sound which occurs when a vehicle
passes over a rumble strip.
Rumble
Groove
MX-5_8FR4-EA-16J_Edition1.indb 84 2016/08/11 20:29:01