EasyManua.ls Logo

Mazda mx-5 2017 - Page 475

Mazda mx-5 2017
568 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
7
41
If Trouble Arises
Warning/Indicator Lights and Warning Sounds
Taking Action
Take the appropriate action and verify that the warning light turns off.
Signal Warning Action to be taken
Seat Belt Warning Light
Except Mexico
The seat belt warning light turns on if the driver
or passenger's seat is occupied and the seat belt
is not fastened with the ignition switched ON.
If the driver or passenger's seat belt is
unfastened (only when the passenger's seat is
occupied) and the vehicle is driven at a speed
faster than about 20 km/h (12 mph), the warning
light ashes. After a short time, the warning
light stops ashing, but remains illuminated.
NOTE
The warning light ashes for about 6 seconds
if the driver's seat belt is not fastened when the
ignition is switched ON.
To allow the passenger occupant classication
sensor to function properly, do not place
and sit on an additional seat cushion on the
passenger's seat. The sensor may not function
properly because the additional seat cushion
could cause sensor interference.
If a small child is seated on the passenger's
seat, the warning light may not operate.
Mexico
The seat belt warning light turns on if the driver
or passenger's seat is occupied and the seat belt
is not fastened with the ignition switched ON.
If the driver or passenger's seat belt is
unfastened (only when the passenger's seat is
occupied) and the vehicle is driven at a speed
faster than about 20 km/h (12 mph), the warning
light ashes. After a short time, the warning
light stops ashing, but remains illuminated. If
a seat belt remains unfastened, the warning light
ashes again for a given period of time.
NOTE
Placing heavy items on the passenger's seat
may cause the passenger's seat belt warning
function to operate depending on the weight
of the item.
To allow the passenger seat weight sensor to
function properly, do not place and sit on an
additional seat cushion on the passenger's
seat. The sensor may not function properly
because the additional seat cushion could
cause sensor interference.
If a small child is seated on the passenger's
seat, the warning light may not operate.
Fasten the seat belts.
MX-5_8FR4-EA-16J_Edition1.indb 41 2016/08/11 20:30:04

Table of Contents

Related product manuals