Mazda mx-5 2017 - Tires

9 – 8
Specications
Specications
Tires
NOTE
The tires have been optimally matched with the chassis of your vehicle.
When replacing tires, Mazda recommends that you replace tires of the same type originally
tted to your vehicle. For details, contact an Authorized Mazda Dealer.
Check the tire pressure label for tire size and ination pressure.
Refer to Tire Ination Pressure on page 6-41.
After adjusting the tire pressure, initialization of the tire pressure monitoring system is
necessary to make the system operate normally.
Refer to Tire Pressure Monitoring System Initialization on page 4-108.
Standard tire
Tire size
Ination pressure
Front Rear
195/50R16 84V 200 kPa (2.0 bar, 29 psi) 200 kPa (2.0 bar, 29 psi)
205/45R17 84W 200 kPa (2.0 bar, 29 psi) 200 kPa (2.0 bar, 29 psi)
Lug nut tightening torque
When installing a tire, tighten the lug nut to the following torque.
108—147 N·m (12—14 kgf·m, 80—108 ft·lbf)
Fuses
Refer to Fuses on page 6-54.
MX-5_8FR4-EA-16J_Edition1.indb 8 2016/08/11 20:30:22