DTC 03:ER02
DTC 03:Er02 CD player
DETECTION
CONDITION
NOTE:
• When error occurs, error message "CHECK CD" is displayed in the
LCD.
• Cannot play CD normally or change tracks.
POSSIBLE CAUSE
• Defective CD (scratches or dirt)
• CD player malfunction
STEP INSPECTION ACTION
Yes Go to Step 3.
Cannot change
to specific
tracks.
Go to the next step.
1
Play the CD and
change tracks.
Can tracks be changed?
No
Cannot change
to any track.
Replace the CD and try to change tracks again.
• If the function is normal, go to Step 3.
• If the function is not normal, replace the CD
player. (See AUDIO UNIT
DISASSEMBLY/ASSEMBLY .)
Yes Go to the next step.
2
Verify the condition of
the CD when the error
occurs.
Is the CD normal?
No
Repair (remove foreign material, clean) or replace the CD, and go to the
next step.
Yes
Replace the CD player. (See AUDIO UNIT
DISASSEMBLY/ASSEMBLY .)
3
Clear the DTC.
Play the CD and change
tracks.
Is DTC 03: Er02
displayed?
No DTC troubleshooting completed.