DTC 00:ER01
DTC 00:Er01 Cassette deck
DETECTION
CONDITION
• Cassette deck cannot implement insert and eject commands.
POSSIBLE CAUSE
• Defective cassette tape (deformation, broken, or foreign material
stuck/attached)
• Cassette deck malfunction
Diagnostic procedure
STEP INSPECTION ACTION
Yes Go to the next step.
1 Can cassette tape be ejected?
No Replace the cassette deck.
Yes Go to the next step.
2
Verify condition of the cassette tape
when the error occurs.
Is the cassette tape normal?
No
Repair (remove foreign material) or replace the cassette
tape, and go to the next step.
Yes
Replace the cassette deck. (See AUDIO UNIT
DISASSEMBLY/ASSEMBLY .)
3
Clear the DTC.
Insert then eject a normal cassette
tape.
Is DTC 00: Er01 displayed?
No DTC troubleshooting completed.