Mazda RX8 - Page 376

SECURITY LIGHT: 21, DTC B1213/P1260
SECURITY LIGHT: 21
DTC: B1213/P1260
Only one key ID number is registered.
DETECTION CONDITION
• Only one key is registered.
POSSIBLE CAUSE
• Only one registered key
Diagnostic Procedure
STEP INSPECTION ACTION
Yes
Replace the keyless control module and perform
procedures for when replacing the keyless control
module only.
(See KEYLESS CONTROL MODULE
REMOVAL/INSTALLATION .)
(See IMMOBILIZER SYSTEM COMPONENT
REPLACEMENT/KEY ADDITION AND
CLEARING .)
1
VERIFY NUMBER OF REGISTERED
KEYS
• Using the WDS or equivalent, perform
the PID/data monitor inspection and
confirm the number of registered keys.
(See PID/DATA MONITOR TABLE .)
• Are two or more keys registered?
No
• Using the WDS or equivalent, clear the
key ID number and register a new key if
necessary.
(See IMMOBILIZER SYSTEM
COMPONENT REPLACEMENT/KEY
ADDITION AND CLEARING .)
• Go to the next step.
(w) RX-8 Body
Page 376