Mazda RX8 - Page 443

• Connect PCM connector.
• Connect EPS control module connector.
• Connect TCM connector.
• Connect ABS (DSC) HU/CM connector.
• Connect keyless control module connector.
• Connect TPMS control module connector.
• Connect steering angle sensor connector.
• Connect instrument cluster connector.
• Clear DTC from module memory using SST (WDS or
equivalent).
• Perform KOEO/KOER self-test.
• Are DTCs U0073, U1900 and/or U2516 indicated?
No Troubleshooting completed.
(w) RX-8 Body
Page 443