Mazda RX8 - Page 55

• If they are not sealed, perform Steps 34 and adjust again.
DRAIN HOSE
FRONT DRAIN HOSE REMOVAL
1. Remove the following parts:
a. Roof side trim(See ROOF SIDE TRIM REMOVAL/INSTALLATION .)
b. A-pillar trim(See A-PILLAR TRIM REMOVAL/INSTALLATION .)
c. Rear seat(See REAR SEAT REMOVAL/INSTALLATION .)
d. Inner scuff plate(See INNER SCUFF PLATE REMOVAL/INSTALLATION .)
e. Tire house trim(See TIRE HOUSE TRIM REMOVAL/INSTALLATION .)
f. Rear pillar trim(See REAR PILLAR TRIM REMOVAL/INSTALLATION .)
g. Map light(See MAP LIGHT REMOVAL/INSTALLATION .)
h. Interior light(See INTERIOR LIGHT REMOVAL/INSTALLATION .)
(w) RX-8 Body
Page 55