3. Install the front drain hose to the clips parallel to the pillar and free of looseness.
4. Insert the front drain hose grommet into the hole of the inner hinge pillar.
5. Install the following parts:
a. Headliner(See HEADLINER REMOVAL/INSTALLATION .)
b. Assist handle(See ASSIST HANDLE REMOVAL/INSTALLATION .)
c. Sunvisor(See SUNVISOR REMOVAL/INSTALLATION .)
d. Interior light(See INTERIOR LIGHT REMOVAL/INSTALLATION .)
e. Map light(See MAP LIGHT REMOVAL/INSTALLATION .)
f. Rear pillar trim(See REAR PILLAR TRIM REMOVAL/INSTALLATION .)
g. Tire house trim(See TIRE HOUSE TRIM REMOVAL/INSTALLATION .)
h. Inner scuff plate(See INNER SCUFF PLATE REMOVAL/INSTALLATION .)
i. Rear seat(See REAR SEAT REMOVAL/INSTALLATION .)
j. A-pillar trim(See A-PILLAR TRIM REMOVAL/INSTALLATION .)
To Next Page
Loading...
