SASH FILM
DOOR SASH FILM REMOVAL
1. Partially peel back the glass run channel.
2. Warm up the door sash film using a hot air blower.
3. Peel off the door sash film by pulling outward from one end.
NOTE:
• Be sure to remove the door sash film slowly, because it can easily tear.
DOOR SASH FILM INSTALLATION
1. Remove any grease or dirt from the affixing surface of the door.
2. Cut away the unused portion along the dotted lines.
3. Peel off the backing paper and attach the door sash film onto the door as shown in the figure.
To Next Page
Loading...
