5. Remove the power window regulator from the speaker installation hole.
6. Install in the reverse order of removal.
CAUTION:
• Make sure the cable does not unspool from the drum housing when installing.
WINDOW MOTOR
POWER WINDOW MOTOR REMOVAL/INSTALLATION
1. Disconnect the negative battery cable.
2. Remove the inner garnish.(See INNER GARNISH REMOVAL/INSTALLATION .)
3. Remove the front door trim.(See FRONT DOOR TRIM REMOVAL/INSTALLATION .)
4. Remove the bolts.
5. Remove the power window motor from the power window regulator drum.
6. Disconnect the power window motor connector.
7. Install in the reverse order of removal.
To Next Page
Loading...
