Need help?Do you have a question about the Mazi INVR-0xA and is the answer not in the manual?
General| Model | INVR-0xA |
|---|---|
| Category | Network Hardware |
| Input Voltage | 100-240V AC |
| Efficiency | 85% |
| Protection Features | Short Circuit |
| Certifications | CE, RoHS |
Compliance statement for radio frequency emissions according to FCC Rules.
Statement of compliance with European directives for product safety and EMC.
Description of the NVR's front panel indicators and ports.
Instructions for operating the NVR using the infrared remote control.
Guide on using a USB mouse for NVR navigation and control.
Explanation of the virtual keyboard layout and its functions.
Overview of the NVR's menu system, icons, and navigation methods.
Details of connectors and ports on the NVR's rear panel.
Procedures for safely starting up, shutting down, and rebooting the NVR.
Step-by-step guide for configuring essential NVR settings upon first use.
Process for adding, configuring, and managing connected IP cameras.
Introduction to the live video feed display and its status icons.
Overview of available functions and operations within the Live View mode.
How to adjust display settings like output resolution and dwell time.
Procedure for securely ending the current user session on the NVR.
Configuring essential parameters before controlling PTZ cameras.
Setting up PTZ camera presets, patrol routes, and movement patterns.
Overview of the toolbar icons for PTZ camera manipulation.
Configuring video resolution, frame rate, and stream types.
Setting up automatic recording based on defined time schedules.
Configuring the NVR to record upon detecting motion.
Starting and stopping video recording manually.
Setting up specific recording schedules for holidays.
Organizing installed HDDs into groups for managed storage.
Methods to prevent overwriting important recorded footage.
Methods to search and access recorded video files.
Advanced functions for reviewing recorded video, like frame-by-frame and zoom.
Procedures for backing up recorded video files to external storage.
Operations for managing USB drives and other backup media.
Setting up alerts and actions for motion detection events.
Configuring notifications when a camera signal is lost.
Setting up alerts for camera lens tampering.
Configuring responses to various system errors and exceptions.
Configuring IP address, DNS, and other fundamental network parameters.
Configuration for advanced network features like PPPoE, DDNS, NTP, SNMP, etc.
Checking real-time network activity and status.
Tools for testing network delay, packet loss, and checking status.
Preparing newly installed HDDs for use with the NVR.
Integrating network-attached storage devices as network HDDs.
Grouping installed HDDs for organized storage management.
Allocating specific storage space for each camera's recordings.
Checking the operational status and health of installed HDDs.
Performing S.M.A.R.T. and bad sector checks on HDDs.
Configuring alarms for HDD failures or errors.
Customizing displayed information like date, time, and camera names.
Defining areas within the camera view to be obscured from view or recording.
Fine-tuning image parameters like brightness, contrast, and hue.
Accessing details about the NVR's device, cameras, network, and storage.
Searching, viewing, and exporting system and event logs.
Exporting NVR settings for backup and importing them to other devices.
Procedures for updating the NVR's system firmware.
Resetting the NVR to its original factory default settings.
Adjusting basic system parameters like language, resolution, and time.
Setting up automatic Daylight Saving Time adjustments.
Configuring additional device parameters like name, number, and logout timeout.
Managing user accounts, including adding, deleting, and editing permissions.
Definitions of technical terms used throughout the manual.
Solutions for frequently encountered NVR problems and error messages.
List of IP camera models verified for compatibility with the NVR.
To Next Page
