Thank you for purchasing the Mbox Xstream OpenELEC Media TV Box
Mbox Xstream Setup Instructions
1: Connect the HDMI cable into one of the HDMI inputs in the back of
your high definition television.
2: Connect the other end of the HDMI cable to the M-Box.
3: If using a wireless keyboard. Connect the usb dongle that came
with the keyboard into one of the two available usb ports located
in the box of the M-Box.
4: Plug in the power supply into the M-Box
5: Change the input on your televisions remote to whichever HDMI input you
have the M-Box connected to.
Television Display Setup (Video Calibration)
1: Select SYSTEM from the main menu.
2: Select SYSTEM from the left menu.
3: Make sure Video Output (first option) is highlighted on the left.
4: From the right menu scroll down and choose VIDEO CALIBRATION.
5: Adjust the top left and bottom right arrows so they fit into the
corner of the television screen.
Internet Setup
1: Select INTERNET SETUP which is located underneath the Programs main menu.
2: Select Network from the left menu
3: Select and enable Wireless Networks for Wifi (Do not Enable “Tethered” Wireless
Access Point)
4: Select Wired Networks when connecting a ethernet cable to the router (Hardwired)
To Next Page
Loading...