MCCORMICK X60 Series - ENGINE at 2200 RPM - Speed in Kph with Rear Tyres

102
Operation
1Creeperspeed 0,29 0,35 0,46 0,31 0,38 0,49
2Creeperspeed 0,46 0,56 0,72 0,49 0,59 0,76
3Creeperspeed 0,58 0,70 0,90 0,62 0,75 0,96
4Creeperspeed 0,86 1,04 1,33 0,92 1,11 1,42

 1Low 1,40 1,69 2,17 1,49 1,80 2,32
 2Low 2,20 2,65 3,42 2,35 2,83 3,65
 3Low 2,78 3,35 4,32 2,96 3,57 4,61
 4Low 4,10 4,94 6,37 4,37 5,27 6,79

 1Standard 3,34 4,03 5,20 3,57 4,30 5,54
 2Standard 5,25 6,34 8,17 5,60 6,76 8,71
 3Standard 6,64 8,01 10,31 7,08 8,54 11,00
 4Standard 9,79 11,81 15,22 10,44 12,60 16,23
 
 1High 8,24 9,95 12,82 8,79 10,61 13,67
 2High 12,96 15,64 20,14 13,82 16,68 21,49
 3High 16,37 19,75 25,44 17,46 21,06 27,14
 4High 24,15 29,14 37,54 25,76 31,08 40,04
ENGINEAT2200RPM-SpeedinKphwithreartyres
FORWARD
SPEED
 16.9R34-540/65R34
 480/70R34-13.6R38
UNDERDRIVE DIRECTDRIVEOVERDRIVE* UNDERDRIVE DIRECTDRIVE OVERDRIVE*
POWERSHIFT
POWERSHIFT
16.9R38
1Creeperspeed - 0,36 - - 0,38 -
2Creeperspeed - 0,56 - - 0,60 -
3Creeperspeed - 0,71 - - 0,76 -
4Creeperspeed - 1,05 - - 1,12 -

 1Low - 1,71 - - 1,82 -
 2Low - 2,68 - - 2,86 -
 3Low - 3,39 - - 3,61 - 
 4Low - 4,99 - - 5,33 -

 1Standard - 4,07 - - 4,35 -
 2Standard - 6,40 - - 6,83 -
 3Standard - 8,09 - - 8,63 
 4Standard - 11,93 - - 12,73 -
 
 1High - 10,05 - - 10,72 -
 2High - 15,80 - - 16,85 -
 3High - 19,95 - - 21,28 -
 4High - 29,43 - - 31,39 -

ENGINEAT2200RPM-SpeedinKphwithreartyres
 16.9R34-540/65R34
 480/70R34-13.6R38
POWERSHIFT
POWERSHIFT
16.9R38
REVERSE
REVERSE
SPEED
UNDERDRIVE DIRECTDRIVEOVERDRIVE* UNDERDRIVE DIRECTDRIVE OVERDRIVE*
X60.20-X60.30-X60.40 - Xtrashift gearbox with Powershuttle electro-hydraulic reverse shuttle and 3 Powershift ranges
under load (only available for forward gears): 36FWD + 12REV without Creeper; 48 FWD + 16 REV with Creeper.
* In tractors with mechanically adjusted engine, the Overdrive is automatically downshifted as soon as a 40 kph speed
is reached.