MCCORMICK X60 Series - Oil Changes in 4 WD Front Axle; Oil Changes in 4 WD Final Drive; Oil Filling in 4 WD Front Axle

210
Maintenance
1000 HOUR MAIN SERVICE
WARNING: Always use specific personal safety devices for each operation. Beware of burns caused by hot tractor
parts. [4.1.n]
Oil changes in 4WD front axle
Axle housing
Placeavesselundertheplug(1),Removetheplugand
drainoutalloil.
Oil filling in 4WD front axle
NOTE: See the Lubricants and Fuels chart for the cor-
rect type of oil.
Front axle housing
Fittheplug(1)backwhennomoreoiliscomingoutand
fillupwithfreshoilthroughthefiller(2)uptothelevel
oftheplug(3).
Wait for the oile to stabilize before checking the level.
Topupifnecessary.
Fittheplugsback(1,2and3).
Oil changes in 4WD final drive
Front side final drives
Positionthefinaldriveplugs(1)downward.Placeavessel
undereachfinaldriveplug(1)(oneforeachfinaldrive).
Removetheplugsanddrainoutalloil.
Oil filling in 4WD front axle
NOTE: See the Lubricants and Fuels chart for the cor-
rect type of oil.
Front side final drives
Positiontheplugs(1)onthewheelcenterline.Fillupwith
oilofthespecifiedtypetotheleveloftheholes.
Waitfortheoiletostabilizebeforecheckingthelevel.Top
upifnecessary.Fittheplugsback(1).