MCCORMICK X60 Series - Precautions against Freezing Temperatures; Fuel System General Inspection

217
Maintenance
7
9
2000 HOUR MAIN SERVICE
Fuel system general inspection
Every 2000 hours of operation see your Dealer for an
inspectionofthefuelsystemandfuelinjectionnozzles.
Moreover,havetheenginecheckedfortuning-up.
Topreventdirtorwaterfromreachingtheinjectionparts
and causing damage and decreased performance, use
cleanfuel,keepthefueltankfull,drainanywaterfromthe
fuelprimaryfilteratregularintervalsandservicethefilters.
WARNING: Always use specific personal safety devices
for each operation. Beware of burns caused by hot
water and engine parts. [4.1.n]
WARNING: Always use specific personal safety devices
for each operation. Beware of burns caused by hot
water and engine parts. [4.1.n]
Precautions against freezing tem-
peratures
Thesystemisfilledwithamixtureofwaterandantifreeze.
Addtheproportionofantifreezegiveninthefollowing
table.
Thismixturecanbepermanentlymaintainedinthecircuit
for1yearsolongasyouhavenottotalized1000hours
serviceduringthisperiod.Inthiscase,themixturemust
bechanged.
Flushoutthesystemwheneveryouchangefromusing
purewatertoantifreezemixturesandviceversa.
 DegreesC° -8° -15° -25° -35°
 20 30 40 50
 Percentageofantifreeze
 pervolume%