MCCORMICK X60 Series - Forward;Neutral;Reverse Switch; Pedal Controls

53
Controls - Cab
3
Forward/Neutral/Reverse switch
POWERSHUTTLEGEARBOX(XTRASHIFTTRACTORS)
UsetheForward/Neutral/Reverse(F/N/R)shuttleleverto
changedirectionoftravel.
Position 1=Forward
N NEUTRAL - Neutral
Position 2=Reverse
Pedal Controls
      
      
1.CLUTCH PEDAL - Used to temporarily disengage
drive.
 Graduallyandcompletelyreleasingtheclutchpedal
foracontrolledsmoothstartandgearchanges.
2.THROTTLEPEDAL
3.BRAKEPEDALS-Theleftbrakepedalstopstheleft
rearwheelandtherightbrakepedalstopstherightrear
wheel.Whenusingthetractorinthefield,thepedalsmay
beusedindependentlytomaketurnseasier.Whendriving
onroads,thepedalsMUSTbelockedtogether.
WARNING: Extra weight and bad traction
conditions, such as mud or ice, increase your
stopping distance. Remember that liquid in
the tires, weights on the machine or wheels,
tanks filled with fertilizer, herbicides or in-
secticides; all these add weight and increase
the distance you need to stop. Do not exceed
maximun permitted operating weights on
axle or tractor.
4.BRAKEPEDALSINTERLOCK-Usedtolockthebrake
pedalstogether.
WARNING: Brake pedals must be locked
together for road travel. This will ensure
uniform brake operation and maximum
stopping ability.