MCCORMICK X60 Series - Pto;Hour Display; Rear Power Take-Off; Rear Power Take-Off Overspeed; Front Power Take-Off Overspeed

66
Instruments and Programming
1.1.1 PTO/Hour Display
Thescreenshows:
Time-13:24
Totalhoursaccumulatedbythetractor-1262.3
PTOmodecurrentlyselected-540Rear
PTORPM-0
ThearrowindicatesthePTOmenuisactive.
Use:
Thefollowingcombinationofscreenscanbedisplayed:
While inside the PTO menu (as indicated by the arrow
ontheright-handside),theoperatormayusetheMENU
buttontoscrollthevaluesoffrontandrearPTOspeed.
Thesescreenshotsareself-configuredaccordingtothe
PTOtypepresentandtotheselectedPTO.
ThescreenshotsdisplaytherearPTOspeedof540,540E
and1000.
RearPowerTake-Off
FrontPowerTake-Off
Rearpowertake-offoverspeed
-540/540E:WhenthePTOshaftrevolvesfasterthan630RPM,theyellowPTOlampontheinstrumentlightsupandthe
buzzersounds.
-1000:WhenthePTOshaftrevolvesfasterthan1170RPM,theyellowPTOlampontheinstrumentlightsupandthe
buzzersounds.
ReducetheengineratedspeedtoreducetherearPTOshaftspeed.
Frontpowertake-offoverspeed
-1000:ThefrontPTOspeedvalueandthefrontPTOsymbolblinkonthedisplay.
ReducetheengineratedspeedtoreducethefrontPTOshaftspeed.