MCCORMICK X60 Series - To Change to Hectares; Acres;Hectars

80
Instruments and Programming
2.1.2 Acres/Hectars
PresstheUPbuttontogotothenextmenusection,thatisusedtosettheunitsfortheAreaWorked.
TheunitscanbeAcresorHectares.
This first screen will show the units currently selected, in the example above this is Acres. The Ac symbol
is showing on the display.
TochangetoHectares:
1-PresstheMENUbutton
2-ThecodeAcwillflash.
3-PressUPorDOWNtoscrollbetweentheoptions.
4-NowthecodeHAwillflash.
5-TosavethisnewsettingpressandholdtheMENUbuttonforlongerthan2seconds(thesymbolswillstopflashing)
andpresstheUPandDOWNbuttonstoaccessotherpartsofthemenu.
- Ifthekeyisturnedtotheoffpositionbeforethenewvalueissettheoldvalueisused.
-AnyvaluessavedintheAreaWorkedmemorywillbeconvertedtothenewunits.