MCCORMICK X60 Series - Engine Constant; Cab Suspension; Front;Rear PTO Options

85
Instruments and Programming
4
2.1.9 Menu of switch detecting
gear selector lever in NEUTRAL
PressingUPagain,themenuoftheswitchdetectinggear
selectorleverinNEUTRALisaccessed.
Thisvaluewassetatthefactoryandmustnotbechan-
ged.
THEFOLLOWINGSCREENISSHOWN.
2.1.8 Cab suspension (not avail-
able)
PressingUPagainwillgototheCabSuspensionPresent
menu.
Thefollowingscreenisshown:
This is NOT an operator menu.
DO NOT enter this menu.
Enteringthismenumightaffectthetractoroperation.
Seeyourdealerformoreinformation.
This is NOT an operator menu.
DO NOT enter this menu.
Enteringthismenumightaffectthetractoroperation.
Seeyourdealerformoreinformation.
2.1.6 Engine constant
PressingUPagainwillgototheEngineConstantmenu.
Thisisaratiousedtocalculatetheactualenginespeed
fromthealternatorpulses.
Thefollowingscreenisshown:
This is NOT an operator menu.
DO NOT enter this menu.
Enteringthismenumightaffectthetractoroperation.
Seeyourdealerformoreinformation.
This is NOT an operator menu.
DO NOT press to enter this menu.
Enteringthismenumightaffectthetractoroperation.
Seeyourdealerformoreinformation.
2.1.7 Front/rear PTO options
PressingtheUPbuttonagain,theoptionmenuoffront/
rearPTOcanbeaccessed.
THEFOLLOWINGSCREENISSHOWN