MCCORMICK X60 Series - Screen Brightness Adjustment; To Adjust the Brightness

88
Instruments and Programming
2.1.13 Screen brightness adjustment
PressingUPagainwillgototheScreenBrightnessmenu.Bythismenutheoperatorcansetthebrightnessofthelamps
andoftheLCDwhenthesidelightsareon.Thebrightnessbydaycannotbeadjusted.
Thevaluegoesfrom1to10,where:
-1meanslamplight=5%andLCD/indicatorsbrightness=13%ofmax.capacity.
-10meanslamplight=45%andLCD/indicatorsbrightness=53%ofmax.capacity.
Thedefaultvalueis=5thatmeanslamplight=13%andLCD/indicatorsbrightness=24%ofmax.capacity.
Thescreenshotisthefollowing,accordingtothebrightnesssetting.
"nbr"indicatesbrightnessadjustmentatnight.
Toadjustthebrightness:
1-PresstheMENUbutton.
2-Thepresentvaluewillflash.
3-PressUPorDOWNtoscrollvaluesfrom1to10.
4-TosavethisnewsettingpressandholdtheMENUbuttonforlongerthan2seconds(thenumberwillstopflashing)
andpresstheUPandDOWNbuttonstoaccessotherpartsoftheAccessorymenu.
IfthekeyisturnedtotheOFFpositionbeforethenewvalueisset,theoldvalueisused.
NOTE:Thebrightnessofindicators,LCDandlampsbydayisseton70%ofmax.capacity.