MCCORMICK X60 Series - Wedges for Folding Wheels; Master Disconnect Switch (If Equipped)

98
Operation
Wedges for folding wheels (if
equipped)

(positiondependsonmodel)
Usethewheelwedgeinfrontoforbehindarearwheel,
(dependingonthedirectionofthetractor),whenparking
thetractoronaslope.
IMPORTANT: To prevent accidents do not park the trac-
tor with equipment raised.
Master disconnect switch (if equip-
ped)
Usethemasterdisconnectswitchtodisconnectthebat-
terypowerfromtheelectricalsystemsonthemachine,
whenleavingthe tractor orduringservicingto prevent
accidentalstartup.
Itisa goodhabitto alwaysremovethekeytoprevent
unauthorizeduseoraccidents.
IMPORTANT: Do not use the master disconnect switch
to STOP the Diesel engine, or the machine power units
will be damaged. Such operation can only be consid-
ered as an emergency intervention.
Evenifnotactuallyrequired,itisadvisabletoinsulatethe
machineelectricsystemattheendofeachworkdayby
meansofthemasterdisconnectswitch.Thisoperation
increasessafetyandprolongsbatterylife.
NOTE: The master disconnect switch must be used for
any operation on the electric system. It is at any rate ad-
visable to disconnect the battery completely if welding
is carried out on the machine.
Thepositionofthemasterdisconnectswitchchanges
accordingtotractormodel.
IMPORTANT: In case of fire, immediately detach the
cable from the positive terminal or, if equipped, operate
the master disconnect switch.