Installation Manual MCF-LW12TERWP
mcf88 Via Roma 3, 28060 Sozzago (NO) ITALY - info@mcf88.it - mcf88.it
1 of 4
1. DESCRIPTION
The MCF-LW12TERWP is a IP67 battery powered sensor that reads temperature,
humidity and pressure and sends collected data over the LoRaWAN™ network. Ideally
suited for a wide range of applications such as weather stations, urban monitoring, air
quality, industrial, environmental or farming projects.
2. INSTALLATION
To ensure correct operation and reliable and consistent measurements, install the
MCF-LW12TERWP sensor away from direct sunlight and rain. The device must be
placed where the LoRaWAN signal coverage is good (SF = 7 optimal, SF = 12 weak).
The sensor can be installed on the wall or pole using the included accessories.
To Next Page
Need help?
General