Page 7For technical questions, please call 1-888-866-5797.Items 57572 57567
SAFETYOPERATIONMAINTENANCE INSTALLATION
Breaking in the Compressor
1. Turn Power Switch OFF and unplug Power Cord.
2. Fully open Regulator.
3. Fully open Drain Valve.
4. Plug in Power Cord.
5. Turn Power Switch ON.
6. Let unit run for 15 minutes. Air will expel freely
through the Drain Valve.
7. Turn Power Switch OFF.
8. Unplug Power Cord and close Drain Valve.
Air Connection Setup
1. Connect 1/4″ air hose with Industrial (M-style) plug
(sold separately) to the Air Outlet. The air hose must
be long enough to reach the work area with enough
extra length to allow free movement while working.
2. Consult air tool’s manual for needed accessories.
To Next Page
Loading...
