Do you have a question about the McGREGOR MPW1810 and is the answer not in the manual?
Brand | McGREGOR |
---|---|
Model | MPW1810 |
Category | Pressure Washer |
Language | English |
Insert the spray lance into the spray gun and twist 1/4 turn to lock. Ensure it is securely located in place.
Ensure the ON/OFF switch is in the OFF position before proceeding with setup.
Install the inlet male connector, connect the garden hose, and turn on the water supply.
Connect the garden hose to the water supply and let water run through it.
Switch the pressure washer on to power it up for operation.
Connect the unit to mains power, preferably using an RCD device for safety.
Jet spray is aggressive; do not adjust while spraying. Switch off for long breaks.
Pull the trigger on the spray gun to release a pressured water spray.
Special detergents can enhance cleaning power. Use as directed.
Detergents only for low pressure with adjustable lance; not for turbo lance.