Need help?Do you have a question about the McGrey LK 6120 MIC and is the answer not in the manual?
General| Model | LK 6120 MIC |
|---|---|
| Keys | 61 |
| Touch Response | Yes |
| Built-in Speakers | Yes |
| Demo Songs | Yes |
| Recording Function | Yes |
| MIDI Compatibility | Yes |
| Polyphony | 32 |
| Tones | 255 |
| Rhythms | 255 |
| Connections | Headphone Jack |
| Power Source | AC Adapter or Batteries |
| Power Supply | 9V DC power adapter (included) |
The instrument requires six 1.5V AA batteries. Open the battery compartment cover on the bottom and insert the batteries one after the other with the correct polarity.
Use only the supplied AC adapter. Connect the output cable of the adapter to the power connector on the back of the instrument and the other end to the power outlet.
Connect one end of an audio cable to the PHONES / OUTPUT connector on the keyboard and the other end to the audio input of the audio device.
Connect external audio sources via the AUDIO INPUT or microphone via the MIC jack.
This keyboard is equipped with a light key function. Press [KEY LIGHTING] to enable or disable the light function.
Adjust Master Volume and Accompaniment Volume using the respective +/- buttons.
Activate voice selection with the [TIMBRE] button and choose sounds using number or +/- buttons.
Press [ Keyboard Percussion] to use keys as percussion instruments.
Select, play, and control rhythm patterns using buttons like [Rhythm], [START/STOP], and [FILL-IN].
Utilize 'Single Chord' or 'Fingered Chord' modes for chord-based accompaniment.
Save and recall instrument settings using the direct memory buttons [Memory 1] to [Memory 4].
Apply Transpose, Sustain, Vibrato, and Split functions to modify sound and playability.
Record and play back musical performances using the [REC] and [PLAY] buttons.
Create custom rhythms by programming percussion sounds using the [PROG] button.
Utilize three learning modes (ONE KEY, FOLLOW, ENSEMBLE) with illuminated keys.
To Next Page