Why are the functions on my McHale Industrial Equipment not working?
The functions might not be working because a free flow return is not being used. Ensure the correct free flow return connection to the tractor.
What to do if my McHale C4 Industrial Equipment has intermittent functions?
If you are experiencing intermittent functions, it may be due to a poor power supply. Ensure a good 12V supply directly from the battery.
How to resolve material blocking the chute or not feeding out well on my McHale C4?
Material may be blocking the chute or not feeding out well because the gearbox speed or floor speed is too fast. Use a slow speed to resolve this issue.
General| Brand | McHale |
|---|---|
| Model | C4 Series |
| Category | Industrial Equipment |
| Language | English |
Key information for end users regarding machine registration and warranty.
Details the intended agricultural applications and limitations of the machine.
Provides key physical measurements and technical specifications for different models.
Outlines the tractor requirements for connecting the machine.
Understanding safety symbols, instructions, and PPE for safe operation.
Covers operator criteria, safe operation, fire prevention, and danger zones.
Safety during operation, road travel, maintenance, and child safety.
Essential checks before working on the machine, including tyre inspection.
Critical safety information for hydraulic systems and high-pressure lines.
Essential steps to prevent fires and ensure fire safety.
Detailed explanations of various safety decals and their meanings.
Safety precautions and instructions for lifting and jacking the machine.
Tractor requirements, control box installation, and drawbar/linkage attachment.
Details on short/swing drawbar options and PTO shaft connection.
Ensuring tractor stability and connecting the lighting system.
Adjusting chopper knife setting and servicing gearbox oil.
Tyre inflation pressures and correct usage of drawbar/PTO stands.
Adjusting machine levelness and PTO shaft maintenance.
Explains control box buttons, features, and setup options.
Operation of auxiliary controls and explanation of warning messages.
Critical checks before travelling on public roads for safety and compliance.
Steps for securing the machine for safe transport on public roads.
Detailed steps for loading round and square bales into the machine.
Adjusting comb, chute height, and rotation for optimal distribution.
Explains gear selection and procedures for clearing fan blockages.
Adjusting knife sections, comb fingers, and rotor drive belt tension.
How to adjust floor conveyor chain tension by measuring and adjusting gap.
Recommended intervals for maintenance, including daily checks.
Tasks for weekly, monthly, and annual maintenance schedules.
Tables of recommended torque values for various nuts and bolts.
Procedures for cleaning, greasing, and preparing the machine for end-of-season storage.
Steps for preparing the machine for the start of the season, including reviews and checks.
Common problems, their reasons, and solutions for quick reference.
Explanation of the conformity declaration and its validity.
Details on the PDI form and overview of limited warranty conditions.
Detailed graphical guide for adjusting the PTO shaft.
Tables for converting units of length, area, volume, mass, flow rate, pressure, speed, and torque.
To Next Page
