Mclane 20-3.5RP-7 User Manual

Procedure for attaching the handle assembly to the mower frame using bolts and nuts.

Connects the drive control rod to the manual drive lever and drive pivot rod.

Attaches the throttle control lever to the upper handle and connects the cable.

Connects the upper clutch control rod to the clutch lever assembly.

Adjusts clutch rod tension for proper mower reel and drive operation.

Attaches the grass catcher to the mower, ensuring clearance from reel blades.

Recommendations and procedures for engine fuel and oil.

Specifies the type and viscosity of oil for the engine.

Guidelines on approved fuel types and handling precautions.

Details on setting mower cutting height using front wheel assembly and rear axle.

Procedure to adjust rear axle position for specific cutting heights, especially 1-1/2".

Identification and function of key controls: Throttle, Clutch, and Manual Drive Levers.

Step-by-step instructions for safely starting the mower engine.

Procedures for safely stopping the mower's reel and engine.

General advice for maintaining the mower, including safety and fastener checks.

Instructions for cleaning air cooling system components to prevent overheating.

Methods for cleaning dirt and debris from the engine.

Guidance on checking oil levels and lubricating moving parts.

Information on reel grinding, sharpening, and back-lapping.

Inspection and replacement procedures for the clutch belt.

Detailed steps for replacing the clutch belt and adjusting the belt guard.

Instructions for cleaning and preparing the mower for storage.

Steps for draining fuel, changing oil, and protecting the engine for storage.

Advice on storing gasoline and avoiding moisture damage to the mower.